An automatic transmission (also called automatic gearbox) is one type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. Most automatic transmissions have a defined set of gear ranges, often with a parking pawl feature that locks the output shaft of the transmission.
Similar but larger devices are also used for heavy-duty commercial and industrial vehicles and equipment. Some machines with limited speed ranges or fixed engine speeds, such as some forklifts and lawn mowers, only use a torque converter to provide a variable gearing of the engine to the wheels.
Besides automatics, there are also other types of automated transmissions such as continuous variable transmissions (CVTs) and semi-automatic transmissions, that free the driver from having to shift gears manually, by using the transmission's computer to change gear, if for example the driver were redlining the engine. Despite superficial similarity to other transmissions, automatic transmissions differ significantly in internal operation and driver's feel from semi-automatics and CVTs. An automatic uses a torque converter instead of clutch to manage the connection between the transmission gearing and the engine. In contrast, a CVT uses a belt or other torque transmission schema to allow an "infinite" number of gear ratios instead of a fixed number of gear ratios. A semi-automatic retains a clutch like a manual transmission, but controls the clutch through electrohydraulic means.
A conventional manual transmission is frequently the base equipment in a car, with the option being an automated transmission such as a conventional automatic, semi-automatic, or CVT. The ability to shift gears manually, often via paddle shifters, can also be found on certain automated transmissions (manumatics such as Tiptronic), semi-automatics (BMW SMG), and continuous variable transmissions (CVTs) (such as Lineartronic).
Originally invented by Michael Felix Picone during World War II, so the tank operator had his left foot available to fire 50mm shells from the cross hairs of his tank periscope. The first vehicle to have this technology was a custom-made limousine designed by Michael Felix Picone for General Douglas MacArthur as a gift. The limousine was fabricated from 3 Cadillac sedans. There was no patent ever asked for, because the purpose for the automatic transmission was to help win the war. Also, the original design did not include the parking feature, it only included the automatic gearbox.
Comparison with manual transmission
Most cars sold in North America since the 1950s have been available with an automatic transmissionTemplate:Citation needed. Conversely, automatic transmission is less popular in Europe, with 80% of drivers opting for manual transmission. In some Asian markets and in Australia, automatic transmissions have become very popular since the 1990sTemplate:Citation needed.
Vehicles equipped with automatic transmissions are less complex to drive. Consequently, in some jurisdictions, drivers who have passed their driving test in a vehicle with an automatic transmission will not be licensed to drive a manual transmission vehicle. Conversely, a manual license will allow the driver to drive both manual and automatic vehicles. Examples of driving license restrictions are Croatia, Dominican Republic, Israel, United Kingdom, some states in Australia, France, Portugal, Latvia, Lebanon, Lithuania, Ireland, Belgium, Germany, Pakistan, the Netherlands, Sweden, Austria, Norway, Hungary, South Africa, Trinidad and Tobago, China, Hong Kong, Macau, Mauritius, South Korea, Romania, Singapore, Philippines, United Arab Emirates, India, Estonia, Finland, Switzerland, Slovenia, Republic of Ireland and New Zealand (Restricted licence only)Template:Citation needed. the it works good transmission
Automatic transmission modes
Conventionally, in order to select the transmission operating mode, the driver moves a selection lever located either on the steering column or on the floor (as with a manual on the floor, except that most automatic selectors on the floor don't move in the same type of pattern as a manual lever; most automatic levers only move vertically). In order to select modes, or to manually select specific gear ratios, the driver must push a button in (called the shift lock button) or pull the handle (only on column mounted shifters) out. Some vehicles position selector buttons for each mode on the cockpit instead, freeing up space on the central console. Vehicles conforming to US Government standards must have the modes ordered P-R-N-D-L (left to right, top to bottom, or clockwise). Prior to this, quadrant-selected automatic transmissions often used a P-N-D-L-R layout, or similar. Such a pattern led to a number of deaths and injuries owing to driver error causing unintentional gear selection, as well as the danger of having a selector (when worn) jump into Reverse from Low gear during engine braking maneuvers.
Automatic transmissions have various modes depending on the model and make of the transmission. Some of the common modes include
- Park (P)
- This selection mechanically locks the output shaft of transmission, restricting the vehicle from moving in any direction. A parking pawl prevents the transmission from rotating, and therefore the vehicle from moving, although the vehicle's non-driven roadwheels may still rotate freely. For this reason, it is recommended to use the hand brake (or parking brake) because this actually locks (in most cases) the rear wheels and prevents them from moving. This also increases the life of the transmission and the park pin mechanism, because parking on an incline with the transmission in park without the parking brake engaged will cause undue stress on the parking pin. An efficiently adjusted hand brake should also prevent the car from moving if a worn selector accidentally drops into reverse gear during early morning fast-idle engine warm-upsTemplate:Citation needed. It should be noted that locking the transmission output shaft does not positively lock the driving wheels. If one driving wheel slips while the transmission is in park, the other will roll freely as the slipping wheel rotates in the opposite direction. Only a (properly adjusted) parking brake can be relied upon to positively lock both of the parking-braked wheels. (This is not the case with certain 1950's Chrysler products that carried their parking brake on the transmission tailshaft, a defect compounded by the provision of a bumper jack). It is typical of front-wheel-drive vehicles for the parking brake to be on the rear (non-driving) wheels, so use of both the parking brake and the transmission park lock provides the greatest security against unintended movement on slopes.
- A car should be allowed to come to a complete stop before setting the transmission into park to prevent damage. Usually, Park (P) is one of only two selections in which the car's engine can be started, the other being Neutral (N). In many modern cars and trucks, the driver must have the foot brake applied before the transmission can be taken out of park. The Park position is omitted on buses/coaches with automatic transmission (on which a parking pawl is not practical), which must be placed in neutral with the parking brakes set. Advice is given in some owner's manuals (example: 1997 Oldsmobile Cutlass Supreme owner's manual) that if the vehicle is parked on a steep slope using the park lock only, it may not be possible to release the park lock (move the selector lever out of "P"). Another vehicle may be required to push the stuck vehicle uphill slightly to remove the loading on the park lock pawl.
- Most automobiles require P or N to be set on the selector lever before the internal combustion engine can be started. This is typically achieved via a normally open inhibitor switch, which is wired in series with the starter motor engagement circuit, and is only closed when P or N is selected, thus completing the circuit (when the key is turned to the start position)
- Reverse (R)
- This engages reverse gear within the transmission, giving the ability for the vehicle to drive backwards. In order for the driver to select reverse in modern transmissions, they must come to a complete stop, push the shift lock button in (or pull the shift lever forward in the case of a column shifter) and select reverse. Not coming to a complete stop can cause severe damage to the transmissionTemplate:Citation needed. Many modern automatic transmissions have a safety mechanism in place, which does to some extent prevent (but does not completely avoid) inadvertently putting the car in reverse when the vehicle is moving forwards. This mechanism usually consists of a solenoid-controlled physical barrier on either side of the Reverse position, which is electronically engaged by a switch on the brake pedal. Therefore, the brake pedal needs to be depressed in order to allow the selection of reverse. Some electronic transmissions prevent or delay engagement of reverse gear altogether while the car is moving.
- Some shifters with a shift button allow the driver to freely move the shifter from R to N or D, or simply moving the shifter to N or D without actually depressing the button. However, the driver cannot put back the shifter to R without depressing the shift button to prevent accidental shifting, especially at high speeds, which could damage the transmission.
- Neutral/No gear (N)
- This disengages all gear trains within the transmission, effectively disconnecting the transmission from the driven roadwheels, so the vehicle is able to move freely under its own weight and gain momentum without the motive force from the engine (engine braking). This is the only other selection in which the vehicle's engine can be started.
- Drive (D)
- This position allows the transmission to engage the full range of available forward gear trains, and therefore allows the vehicle to move forward and accelerate through its range of gears. The number of gear ratios a transmission has depends on the model, but they initially ranged from three (predominant before the 1990s), to four and five speeds (losing popularity to six-speed autos, though still favored by Chrysler and Honda/Acura)Template:Citation needed. Six-speed automatic transmissions are probably the most common offering in cars from 2010 in cars like Toyota Camry V6 models, the Chevrolet Malibu LTZ, Corvette, GM trucks, Pontiac G8, Ford Falcon BF 2005-2007 and Falcon FG 2008 - current in Australia with 6 speed ZF, and most newer model Ford/Lincoln/Mercury vehicles). However, seven-speed autos are becoming available in some cars (found in Mercedes 7G gearbox, Infiniti), as are eight-speed autos in models from 2006 introduced by Aisin Seiki Co. in Lexus, ZF and Hyundai Motor Company.
- Overdrive (D, OD, or a boxed [D])
- This mode is used in some transmissions to allow early computer-controlled transmissions to engage the automatic overdrive. In these transmissions, Drive (D) locks the automatic overdrive off, but is identical otherwise. OD (Overdrive) in these cars is engaged under steady speeds or low acceleration at approximately 35–45 mph (56–72 km/h). Under hard acceleration or below 35–45 mph (56–72 km/h), the transmission will automatically downshift. Vehicles with this option should be driven in this mode unless circumstances require a lower gear.
- Third (3)
- This mode limits the transmission to the first three gear ratios, or sometimes locks the transmission in third gear. This can be used to climb or going down hill. Some vehicles will automatically shift up out of third gear in this mode if a certain RPM range is reached in order to prevent engine damage. This gear is also recommended while towing a caravan.
- Second (2 or S)
- This mode limits the transmission to the first two gear ratios, or locks the transmission in second gear on Ford, Kia, and Honda models. This can be used to drive in adverse conditions such as snow and ice, as well as climbing or going down hills in the winter time. It is usually recommended to use second gear for starting on snow and ice, and use of this position enables this with an automatic transmission. Some vehicles will automatically shift up out of second gear in this mode if a certain RPM range is reached in order to prevent engine damage.
- Although traditionally considered second gear, there are other names used. Chrysler models with a three-speed automatic since the late 1980s have called this gear 3 while using the traditional names for Drive and Low. Oldsmobile has called second gear as the 'Super' range - which was first used on their 4-speed Hydramatic transmissions although the use of the term continued until the early 1980s when GM's Turbo Hydramatic automatic transmissions were standardized by all of their divisions years after the 4-speed Hydramatic was discontinued.
- First (1 or L [Low])
- This mode locks the transmission in first gear only. In older vehicles, it will not change to any other gear range. Some vehicles will automatically shift up out of first gear in this mode if a certain RPM range is reached in order to prevent engine damage. This, like second, can be used during the winter season, for towing, or for downhill driving to increase the engine braking effect.
As well as the above modes there are also other modes, dependent on the manufacturer and model. Some examples include:
- In Hondas and Acuras equipped with five-speed automatic transmissions, this mode is used commonly for highway use (as stated in the manual), and uses all five forward gears.
- This mode is also found in Honda and Acura four- or five-speed automatics, and only uses the first four gear ratios. According to the manual, it is used for stop-and-go traffic, such as city driving.
- D3 or 3
- This mode is found in Honda, Acura, Volkswagen and Pontiac four-speed automatics and only uses the first three gear ratios. According to the manual, it is used for stop-and-go traffic, such as city driving.
- D2 and D1
- These modes are found on older Ford transmissions (C6, etc.). In D1, all three gears are used, whereas in D2 the car starts in second gear and upshifts to third.
- S or Sport
- This is commonly described as Sport mode. It operates in an identical manner as "D" mode, except that the upshifts change much higher up the engine's rev range. This has the effect on maximising all the available engine output, and therefore enhances the performance of the vehicle, particularly during acceleration. This mode will also downchange much higher up the rev range compared to "D" mode, maximising the effects of engine braking. This mode will have a detrimental effect on fuel economy. Hyundai has a Norm/Power switch next to the gearshift for this purpose on the Tiburon.
Some early Some early GMs equipped with HYDRA-MATIC transmissions used (S) to indicate Second gear, being the same as the 2 position on a Chrysler, shifting between only first and second gears. This would have been recommended for use on steep grades, or slippery roads like dirt, or ice, and limited to speeds under 40 mph. (L) was used in some early GMs to indicate (L)ow gear, being the same as the 2 position on a Chrysler, locking the transmission into first gear. This would have been recommended for use on steep grades, or slippery roads like dirt, or ice, and limited to speeds under 15 mph.
This would have been recommended for use on steep grades, or slippery roads like dirt, or ice, and limited to speeds under 40 mph.
(L) was used in some early GMs to indicate (L)ow gear, being the same as the 2 position on a Chrysler, locking the transmission into first gear. This would have been recommended for use on steep grades, or slippery roads like dirt, or ice, and limited to speeds under 15 mph.
- + −, and M
- This is for the Manual mode selection of gears in certain automatics, such as Porsche's Tiptronic. The M feature can also be found in Chrysler and General Motors products such as the Dodge Magnum, Journey, and Pontiac G6, as well as Toyota's Camry, Corolla, Fortuner, Previa and Innova. Mitsubishi and some Audi models (Audi TT), meanwhile do not have the M, and instead have the + and -, which is separated from the rest of the shift modes; the same is true for some Peugeot products like Peugeot 206. Meanwhile, the driver can shift up and down at will by toggling the (console mounted) shift lever like a semi-automatic transmission. This mode may be engaged either through a selector/position or by actually changing the gears (e.g., tipping the gear-down paddles mounted near the driver's fingers on the steering wheel).
- Winter (W)
- In some Volvo, Mercedes-Benz, BMW and General Motors Europe models, a winter mode can be engaged so that second gear is selected instead of first when pulling away from stationary, to reduce the likelihood of loss of traction due to wheelspin on snow or ice. On GM cars, this was D2 in the 1950s, and is Second Gear Start after 1990. On Ford, Kia, and Honda automatics, this feature can be accessed by moving the gear selector to 2 to start, then taking your foot off the accelerator while selecting D once the car is moving.
- Brake (B)
- A mode selectable on some Toyota models. In non-hybrid cars, this mode lets the engine do compression braking, also known as engine braking, typically when encountering a steep downhill. Instead of engaging the brakes, the engine in a non-hybrid car switches to a lower gear and slows down the spinning tires. The engine holds the car back, instead of the brakes slowing it down. GM called this "HR" ("hill retarder") and "GR" ("grade retarder") in the 1950s. For hybrid cars, this mode converts the electric motor into a generator for the battery (Regenerative Braking). It is not the same as downshifting in a non-hybrid car, but it has the same effect in slowing the car without using the brakes.
Hydraulic automatic transmissions
Parts and operation
A hydraulic automatic transmission consists of the following parts:
- Torque converter: A type of fluid coupling, hydraulically connecting the engine to the transmission. It takes the place of a mechanical clutch, allowing the transmission to stay in gear and the engine to remain running while the vehicle is stationary, without stalling. A torque converter differs from a fluid coupling, in that it provides a variable amount of torque multiplication at low engine speeds, increasing breakaway acceleration. This is accomplished with a third member in the coupling assembly known as the stator, and by altering the shapes of the vanes inside the coupling in such a way as to curve the fluid's path into the stator. The stator captures the kinetic energy of the transmission fluid, in effect using the leftover force of it to enhance torque multiplication.
- Pump: Not to be confused with the impeller inside the torque converter, the pump is typically a gear pump mounted between the torque converter and the planetary gearset. It draws transmission fluid from a sump and pressurizes it, which is needed for transmission components to operate. The input for the pump is connected to the torque converter housing, which in turn is bolted to the engine's flywheel, so the pump provides pressure whenever the engine is running and there is enough transmission fluid.
- Planetary gearset: A compound epicyclic planetary gearset, whose bands and clutches are actuated by hydraulic servos controlled by the valve body, providing two or more gear ratios.
- Clutches and bands: to effect gear changes, one of two types of clutches or bands are used to hold a particular member of the planetary gearset motionless, while allowing another member to rotate, thereby transmitting torque and producing gear reductions or overdrive ratios. These clutches are actuated by the valve body (see below), their sequence controlled by the transmission's internal programming. Principally, a type of device known as a sprag or roller clutch is used for routine upshifts/downshifts. Operating much as a ratchet, it transmits torque only in one direction, free-wheeling or "overrunning" in the other. The advantage of this type of clutch is that it eliminates the sensitivity of timing a simultaneous clutch release/apply on two planetaries, simply "taking up" the drivetrain load when actuated, and releasing automatically when the next gear's sprag clutch assumes the torque transfer. The bands come into play for manually selected gears, such as low range or reverse, and operate on the planetary drum's circumference. Bands are not applied when drive/overdrive range is selected, the torque being transmitted by the sprag clutches instead. Bands are used for braking; the GM Turbo-Hydramatics incorporated this.Template:Citation needed.
- Valve body: hydraulic control center that receives pressurized fluid from the main pump operated by the fluid coupling/torque converter. The pressure coming from this pump is regulated and used to run a network of spring-loaded valves, check balls and servo pistons. The valves use the pump pressure and the pressure from a centrifugal governor on the output side (as well as hydraulic signals from the range selector valves and the throttle valve or modulator) to control which ratio is selected on the gearset; as the vehicle and engine change speed, the difference between the pressures changes, causing different sets of valves to open and close. The hydraulic pressure controlled by these valves drives the various clutch and brake band actuators, thereby controlling the operation of the planetary gearset to select the optimum gear ratio for the current operating conditions. However, in many modern automatic transmissions, the valves are controlled by electro-mechanical servos which are controlled by the electronic engine control unit (ECU) or a separate transmission control unit (TCU). (See History and improvements below.)
- Hydraulic & lubricating oil: called automatic transmission fluid (ATF), this component of the transmission provides lubrication, corrosion prevention, and a hydraulic medium to convey mechanical power (for the operation of the transmission). Primarily made from refined petroleum, and processed to provide properties that promote smooth power transmission and increase service life, the ATF is one of the few parts of the automatic transmission that needs routine service as the vehicle ages.
The multitude of parts, along with the complex design of the valve body, originally made hydraulic automatic transmissions much more complicated (and expensive) to build and repair than manual transmissions. In most cars (except US family, luxury, sport-utility vehicle, and minivan models) they have usually been extra-cost options for this reason. Mass manufacturing and decades of improvement have reduced this cost gap.
Hydraulic automatic transmissions are almost always less energy efficient than manual transmissions due mainly to viscous and pumping losses, both in the torque converter and the hydraulic actuators. A relatively small amount of energy is required to pressurize the hydraulic control system, which uses fluid pressure to determine the correct shifting patterns and operate the various automatic clutch mechanisms.
Manual transmissions use a mechanical clutch to transmit torque, rather than a torque converter, thus avoiding the primary source of loss in an automatic transmission. Manual transmissions also avoid the power requirement of the hydraulic control system, by relying on the human muscle power of the vehicle operator to disengage the clutch and actuate the gear levers, and the mental power of the operator to make appropriate gear ratio selections. Thus the manual transmission requires very little engine power to function, with the main power consumption due to drag from the gear train being immersed in the lubricating oil of the gearbox.
The on-road acceleration of an automatic transmission can occasionally exceed that of an otherwise identical vehicle equipped with a manual transmission in turbocharged diesel applications. Turbo-boost is normally lost between gear changes in a manual whereas in an automatic the accelerator pedal can remain fully depressed. This however is still largely dependent upon the number and optimal spacing of gear ratios for each unit, and whether or not the elimination of spooldown/accelerator lift off represent a significant enough gain to counter the slightly higher power consumption of the automatic transmission itself. it works good.
Automatic transmission models
Some of the best known automatic transmission families include:
- General Motors — Dynaflow, Powerglide, "Turbo-Hydramatic" TH350, TH400 and 700R4, 4L60-E, 4L80-E, Holden Trimatic
- Ford: Cruise-O-Matic, C4, CD4E, C6, AOD/AODE, E4OD, ATX, AXOD/AX4S/AX4N
- Chrysler: TorqueFlite 727 and 904, A500, A518, 45RFE, 545RFE
- BorgWarner (later Aisin AW)
- ZF Friedrichshafen automatic transmissions
- Allison Transmission
- Voith Turbo
- Aisin AW; Aisin AW is a Japanese automotive parts supplier, known for its automatic transmissions and navigation systems
- Volkswagen Group - 01M
- Drivetrain Systems International (DSI) - M93, M97 and M74 4-speeds, M78 and M79 6-speeds
- Hyundai Powertech - 4F12, 4F16, 4F23 4-Speeds, 5F25, 5F16, 5F23 5-Speeds, 6F17, 6F26, 6F40 6-Speeds, 8R40, 8R50 8-Speeds,
Mini Cooper- Automatic or manual transmission, all models
Automatic transmission families are usually based on Ravigneaux, Template:Disambiguation needed, or Simpson planetary gearsets. Each uses some arrangement of one or two central sun gears, and a ring gear, with differing arrangements of planet gears that surround the sun and mesh with the ring. An exception to this is the Hondamatic line from Honda, which uses sliding gears on parallel axes like a manual transmission without any planetary gearsets. Although the Honda is quite different from all other automatics, it is also quite different from an automated manual transmission (AMT).
Many of the above AMTs exist in modified states, which were created by racing enthusiasts and their mechanics by systematically re-engineering the transmission to achieve higher levels of performance. These are known as "performance transmissions". An example of a manufacturer of high performance transmissions of General Motors and Ford transmissions is PerformaBuilt.
Continuously variable transmissions
A fundamentally different type of automatic transmission is the continuously variable transmission or CVT, which can smoothly and steplessly alter its gear ratio by varying the diameter of a pair of belt or chain-linked pulleys, wheels or cones. Some continuously variable transmissions use a hydrostatic drive — consisting of a variable displacement pump and a hydraulic motor — to transmit power without gears. CVT designs are usually as fuel efficient as manual transmissions in city driving, but early designs lose efficiency as engine speed increases.
A slightly different approach to CVT is the concept of toroidal CVT or infinitely variable transmission (IVT). These concepts provide zero and reverse gear ratios.
Some current hybrid vehicles, notably those of Toyota, Lexus and Ford Motor Company, have an electronically controlled CVT (E-CVT). In this system, the transmission has fixed gears, but the ratio of wheel-speed to engine-speed can be continuously varied by controlling the speed of the third input to a differential using an electric motor-generator.
Manually controlled automatic transmissions
Most automatic transmissions offer the driver a certain amount of manual control over the transmission's shifts (beyond the obvious selection of forward, reverse, or neutral). Those controls take several forms:
- Throttle kickdown
- Most automatic transmissions include some means of forcing a downshift into the lowest possible gear ratio if the throttle pedal is fully depressed. In many older designs, kickdown is accomplished by mechanically actuating a valve inside the transmission. Most modern designs use a solenoid-operated valve that is triggered by a switch on the throttle linkage or by the engine control unit (ECU) in response to an abrupt increase in engine power.
- Mode selection
- Allows the driver to choose between preset shifting programs. For example, Economy mode saves fuel by upshifting at lower engine speeds, while Sport mode (aka "Power" or "Performance") delays shifting for maximum acceleration. The modes also change how the computer responds to throttle input.
- Low gear ranges
- Conventionally, automatic transmissions have selector positions that allow the driver to limit the maximum ratio that the transmission may engage. On older transmissions, this was accomplished by a mechanical lockout in the transmission valve body preventing an upshift until the lockout was disengaged; on computer-controlled transmissions, the same effect is accomplished by firmware. The transmission can still upshift and downshift automatically between the remaining ratios: for example, in the 3 range, a transmission could shift from first to second to third, but not into fourth or higher ratios. Some transmissions will still upshift automatically into the higher ratio if the engine reaches its maximum permissible speed in the selected rangeTemplate:Citation needed.
- Manual controls
- Some transmissions have a mode in which the driver has full control of ratio changes (either by moving the selector, or through the use of buttons or paddles), completely overriding the automated function of the hydraulic controller. Such control is particularly useful in cornering, to avoid unwanted upshifts or downshifts that could compromise the vehicle's balance or traction. "Manumatic" shifters, first popularized by Porsche in the 1990s under the trade name Tiptronic, have become a popular option on sports cars and other performance vehicles. With the near-universal prevalence of electronically controlled transmissions, they are comparatively simple and inexpensive, requiring only software changes, and the provision of the actual manual controls for the driver. The amount of true manual control provided is highly variable: some systems will override the driver's selections under certain conditions, generally in the interest of preventing engine damage. Since these gearboxes also have a throttle kickdown switch, it is impossible to fully exploit the engine power at low to medium engine speedsTemplate:FixTemplate:Citation needed.
- Second gear takeoff
- Some automatics, particularly those fitted to larger capacity or high torque engines, either when "2" is manually selected, or by engaging a winter mode, will start off in second gear instead of first, and then not shift into a higher gear until returned to "D." Also note that as with most American automatic transmissions, selecting "2" using the selection lever will not tell the transmission to be in only 2nd gear; rather, it will simply limit the transmission to 2nd gear after prolonging the duration of 1st gear through higher speeds than normal operation. The 2000-2002 Lincoln LS V8 (the five-speed automatic without manumatic capabilities, as opposed to the optional sport package w/ manu-matic 5-speed) started in 2nd gear during most starts both in winter and other seasons by selecting the "D5" transmission selection notch in the shiftgate (for fuel savings), whereas "D4" would always start in 1st gear. This is done to reduce torque multiplication when proceeding forward from a standstill in conditions where traction was limited—on snow- or ice-covered roads, for example.
Some automatic transmissions modified or designed specifically for drag racing may also incorporate a transmission brake, or "trans-brake," as part of a manual valve body. Activated by electrical solenoid control, a trans-brake simultaneously engages the first and reverse gears, locking the transmission and preventing the input shaft from turning. This allows the driver of the car to raise the engine RPM against the resistance of the torque converter, then launch the car by simply releasing the trans-brake switch.
The cost to rebuild an automatic transmission varies. In complete regards to Honda's transmissions, such as BAXA, MAXA (Honda Accord), usually require the least amount of parts when rebuilding. It is very common for these units to require a new filter, set of clutches, overhaul kit and possibly a bearing or new clutch drum. The most common fault in these particular transmissions is in the filtration system. There is no access to the filter of Honda transmissions; they are bolted down inside the transmission, with no external access, unless completely dissembled. It is this reason, and also the driving conditions, heat and normal wear and tear, that Honda transmissions typically go out at around 130,000 miles to 180,000 miles. The filter begins to lose its filtration and thus produces an increase of heat within the entire unit. As heat builds up and less lubrication occurs, the third clutch drum (most sensitive to failure) begins to give out. Or clutches may become worn excessively or a bearing may warp. It is not uncommon to open up a Honda Accord transmission and find that most of the parts are not worn, clean and reusable. It is common to see the same failure rate among the filter, third clutch drum, bearings, and or bushings.
- Semi-automatic transmission
- AMC and Jeep transmissions
- Dual clutch transmission
- Multimode manual transmission
- ↑ "Nearly 80% Of Passenger Cars Are Sold With Manual Transmission In Europe". Prlog.org. 2006-09-12. http://www.prlog.org/10000955-nearly-80-of-passenger-cars-are-sold-with-manual-transmission-in-europe.html. Retrieved 2009-10-03.